|Material:||Active Carbon||Size:||10 Inch|
|Use:||Household Pre-Filtration||Replacement:||6 Monthes|
10 inch CTO Activated Carbon or Coconut Carbon Water Filter Cartridge
|Core:||Mineral AC & Coconut shell AC|
|O ring/Gasket:||Silicone, EPDM, Buna-N|
|Specifications||Pore size(um):||5,10 Micron|
|Outer Diameter(OD):||63mm,70mm,115mm(can be decided by client)|
|Length(inch):||5"10"20" 30"40"(can be decided by client)|
|Technical data||Max differential pressure:||7 bar at 20°C|
|Recommended change out:||1-1.5bar|
Filter Media: Coal carbon, Coconut carbon
Micron Rating: 5um, 10um, 20um
Inside Diameter: 28mm
Outside Diameter: 68MM /115MM
Length: 5", 10", 20", 30", 40"
Activated Carbon Filter Cartridge is extruded and shaped by activated carbon fines. The material can be mineral type or coco-nut. The function of this cartridge is the removal of chlorine, bad taste and organic. Ensuring no carbon fines release and strong adsorptivity.
• Drinking water
• Paints, coatings and plating solutions
Material of Construction
• Filter Media: Mineral or coco-nut
• End cap : Polypropylene
• Netting: Polyethylene
• Micron Rating:5µm, 10µm
• Inside diameter: 28mm
• Outside diameter: 68mm or 115mm
• Length: 5", 10", 20", 30", 40"
Recommended Operating Conditions
Max. Operating Temperature: 52°C
Max. Differential Pressure: 7Bar@20°C
3. Feature and Benefit
The Activated Carbon Block Filter Cartridge is made from high density activated carbon particles and harmless adhesive. And the outside PP bonded no woven fabric can remove over 90% remaining chlorine and 95% volatility organics effectively. Its ash content is controlled to be the lowest to retain more effective micron-pores.